Reenumeration B (REB) Section

Fall 2018

BOX_00 (REB1000)

BOX_260 (REB1003)

BOX_270 (REB1005)

BOX_280 (REB1010)

RE880 (REB1015)

BLAISE NAME: RelChng

Context Header: {STR-DT}

Question Text:

{Since {START DATE}/Between {START DATE} and December 31, {YEAR}}, have any of the relationships between members of this household changed?

IF NECESSARY, REVIEW RELATIONSHIP GRID WITH RESPONDENT BY SHOWING OR READING FROM SCREEN.

READ GRID STARTING FROM LEFT. EXAMPLE: "(NAME ON LEFT) IS (NAME ON TOP)'S _________ (RELATIONSHIP)."

{TO VIEW RELATIONSHIP GRID PRESS CTRL-X

TO CLOSE RELATIONSHIP GRID PRESS ESC}

MEMBER NAME | RU MEMBER 1 | RU MEMBER 2 | RU MEMBER 3

1. FIRST | [DISPLAY | [DISPLAY | [DISPLAY

NAME - 15 | RELATIONSHIP] | RELATIONSHIP] | RELATIONSHIP]

2. FIRST | [DISPLAY | [DISPLAY | [DISPLAY

NAME - 15 | RELATIONSHIP] | RELATIONSHIP] | RELATIONSHIP]

3. FIRST | [DISPLAY | [DISPLAY | [DISPLAY |

NAME - 15 | RELATIONSHIP] | RELATIONSHIP] | RELATIONSHIP]

Responses: YES 1 RE900 (REB1027)

NO 2 BOX_330 (REB1115)

REFUSED RF BOX_330 (REB1115)

DON'T KNOW DK BOX_330 (REB1115)

Programmer Instructions: Roster Behavior:

1. The column heading ‘MEMBER NAME’ should display the respondent or the reference person if proxy respondent and then all remaining RU members from oldest to youngest using the Age Order specifications in the GL section.
   
   
2. Display relationships that were coded in the previous round and are still applicable, including reciprocal relationships (preloaded RelCode).

Display Instructions: Roster definition: Roster 1- report

This item displays the RU-members-roster and all persons flagged as “NEW STUDENTS”. The column headings 'RU MEMBER N' are filled with the RU members first name (RE_Person.Fname) and age (RE_Person.agernd) in parentheses. The column heading ‘MEMBER NAME’ is filled with the first name of the person being looped on (RE_Person.Fname) and age (RE_Person.agernd) in parentheses. Display MEMBER NAME’s relationship to RU MEMBER N. Display the preloaded (from the previous round, as available) relationship.

Roster filter:

Display persons on the RE_Person Array where MostRecentRU = RUUnit who meet either of the following conditions:

1. Person is a member of the RU (CtrlCurrHere_AtBOX270 = YES) or
2. Person is a 'NEW STUDENT' (StudentMoverAtLoop20 = YES or StudentMoverAtLoop30 = YES).

Display 'Since {START DATE}' if not round 5.

Display 'Between {START DATE} and December 31, {YEAR}' where 'YEAR' is the second calendar year of the panel, if round 5.

Display "TO VIEW RELATIONSHIP GRID PRESS CTRL-X TO CLOSE RELATIONSHIP GRID PRESS ESC" if the the number of RU members displayed is >=7 otherwise use a null display.

RE890 (REB1020)

BLAISE NAME: RelGridIntro

Question Text:

{Now I would like to collect information about how the {new} members of this household are related {to the family}./Please tell me whose relationships have changed./INTERVIEWER: FILL IN MISSING RELATIONSHIPS.}

{READ GRID STARTING FROM LEFT. EXAMPLE: "(NAME ON LEFT) IS (NAME ON TOP)’S ______________ (RELATIONSHIP)."}

{TO VIEW RELATIONSHIP GRID PRESS CTRL-X TO CLOSE RELATIONSHIP GRID PRESS ESC}

MEMBER NAME | RU MEMBER 1 | RU MEMBER 2 | RU MEMBER 3 |

1. FIRST | [DISPLAY | [DISPLAY | [DISPLAY |

NAME - 15 | RELATIONSHIP] | RELATIONSHIP] | RELATIONSHIP] |

2. FIRST | [DISPLAY | [DISPLAY | [DISPLAY |

NAME - 15 | RELATIONSHIP] | RELATIONSHIP] | RELATIONSHIP] |

3. FIRST | [DISPLAY | [DISPLAY | [DISPLAY |

NAME - 15 | RELATIONSHIP] | RELATIONSHIP] | RELATIONSHIP] |

Responses: CONTINUE 1 LOOP_70 (REB1025)

Programmer Instructions: Roster Behavior:

1. The column heading ‘MEMBER NAME’ should display the respondent or the reference person if proxy respondent and then all remaining RU members from oldest to youngest using the Age Order specifications in the GL section.
   
   
2. Display relationships that were coded in the previous round and are still applicable, including reciprocal relationships. Note that the relationships collected in the NHIS will not be pre-filled in the round 1 CAPI (preloaded RelCode).
   
   
3. Display question mark for relationships not yet coded or where relationship was coded 'RF' (REFUSED) or 'DK' (DON'T KNOW) in previous round.

Display Instructions: Roster definition: Roster 1- report

This item displays the RU-members-roster and all persons flagged as “NEW STUDENTS”. The column headings 'RU MEMBER N' are filled with the RU members first name (RE_Person.Fname) and age (RE_Person.agernd) in parentheses. The column heading ‘MEMBER NAME’ is filled with the first name of the person being looped on (RE_Person.Fname) and age (RE_Person.agernd) in parentheses. Display MEMBER NAME’s relationship to RU MEMBER N. Display the preloaded (from the previous round, as available) relationship.

Roster filter:

Display persons on the RE_Person Array where MostRecent RU = RUUnit who meet either of the following conditions:

1. Person is a member of the RU (CtrlCurrHere_AtBOX270 = YES)

or

2. Person is a ‘NEW STUDENT’ (StudentMoverAtLoop20 = YES or StudentMoverAtLoop30 = YES).

Display ‘Now I would like to collect information about how the {new} members of this household are related {to the family}.’ If Round 1 or if Rounds 2-5 and at least one new RU member was added this round.

Display ‘new’ if Rounds 2-5 and at least one new RU member was added this round. Otherwise, use a null display.

Display ‘to the family’ if Rounds 2-5 and at least one new RU member was added this round. Otherwise, use a null display.

Display ‘Please tell me whose relationships have changed.' If Rounds 2-5 and RE880 was coded ‘1’(YES).

Display ‘INTERVIEWER: FILL IN MISSING RELATIONSHIPS.’ if Rounds 2-5 and no new RU members have been added this round, and at least one relationship is coded ‘RF’ (REFUSED) or ‘DK’ (DON’T KNOW) from a previous round.

Display ‘READ GRID STARTING FROM LEFT. EXAMPLE: "(NAME ON LEFT) IS (NAME ON TOP)’S (RELATIONSHIP)." if rounds 2-5. Otherwise, use a null display.

Display "TO VIEW RELATIONSHIP GRID PRESS CTRL-X TO CLOSE RELATIONSHIP GRID PRESS ESC" if the the number of RU members displayed is >=7 otherwise use a null display.

LOOP_70 (REB1025)

LOOP_75 (REB1026)

RE900 (REB1027)

BLAISE NAME: RelCode

Question Text:

[I would like to know how everyone is related to {you/{PERSON}}.]

{RU MEMBER} {is/was} {your/{PERSON}'s}

HELP: F1

Responses: MOTHER (BIOLOGICAL/ADOPTIVE) 1

FATHER (BIOLOGICAL/ADOPTIVE) 2

SISTER/STEP-/HALF- 3

BROTHER/STEP-/HALF- 4

DAUGHTER/ADOPTED DAUGHTER 5

SON/ADOPTED SON 6

HUSBAND/WIFE/SPOUSE 7

UNMARRIED PARTNER 8

MOTHER-IN-LAW 9

FATHER-IN-LAW 10

SISTER-IN-LAW 11

BROTHER-IN-LAW 12

DAUGHTER-IN-LAW 13

SON-IN-LAW 14

STEPMOTHER 15

STEPFATHER 16

STEPDAUGHTER 17

STEPSON 18

GRANDMOTHER 19

GRANDFATHER 20

AUNT 21

UNCLE 22

NIECE 23

NEPHEW 24

COUSIN 25

GRANDSON 26

GRANDDAUGHTER 27

PARTNER OF {PERSON}'s PARENT 28

DAUGHTER OF {PERSON LOOPING ON}'s 30

PARTNER

SON OF {PERSON LOOPING ON}'s 31

PARTNER

GREAT GRANDMOTHER 32

GREAT GRANDFATHER 33

FOSTER MOTHER 34

FOSTER FATHER 35

FOSTER DAUGHTER 36

FOSTER SON 37

GREAT GRANDDAUGHTER 38

GREAT GRANDSON 39

GREAT AUNT 40

GREAT UNCLE 41

GREAT NIECE 42

GREAT NEPHEW 43

FOSTER SISTER 44

FOSTER BROTHER 45

OTHER RELATED (NO SPECIFY) 91

NOT RELATED 99

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Go to END_LP75.CAPI should not present a question asking about reciprocal relationships or relationships that would be flagged as ‘SELF’. Reciprocal relationships should be autocoded as follows:

1. If the {RU MEMBER} is {PERSONS} '1' (MOTHER (BIOLOGICAL/ADOPTIVE)) then autocode the reciprocal relationship to '5' (DAUGHTER/ADOPTED DAUGHTER) if the {PERSON} is female, or '6' (SON/ADOPTED SON) if the {PERSON} is male.
   
   
2. If the {RU MEMBER} is {PERSONS} '2' (FATHER (BIOLOGICAL/ADOPTIVE)) then autocode the reciprocal relationship to '5' (DAUGHTER/ADOPTED DAUGHTER) if the {PERSON} is female, or '6' (SON/ADOPTED SON) if the {PERSON} is male.
   
   
3. If the {RU MEMBER} is {PERSONS} '3' (SISTER/STEP-/HALF-) then autocode the reciprocal relationship to '3' (SISTER/STEP-/HALF-) if the {PERSON} is female, or '4' (BROTHER/STEP-/HALF-) if the {PERSON} is male.
   
   
4. If the {RU MEMBER} is {PERSONS} '4' (BROTHER/STEP-/HALF-) then autocode the reciprocal relationship to '3' (SISTER/STEP-/HALF-) if the {PERSON} is female, or '4' (BROTHER/STEP-/HALF-) if the {PERSON} is male.
   
   
5. If the {RU MEMBER} is {PERSONS} '5' (DAUGHTER/ADOPTED DAUGHTER) then autocode the reciprocal relationship to '1' (MOTHER (BIOLOGICAL/ADOPTIVE)) if the {PERSON} is female, or '2' (FATHER (BIOLOGICAL/ADOPTIVE)) if the {PERSON} is male.
   
   
6. If the {RU MEMBER} is {PERSONS} '6' (SON/ADOPTED SON) then autocode the reciprocal relationship to '1' (MOTHER (BIOLOGICAL/ADOPTIVE)) if the {PERSON} is female, or '2' (FATHER (BIOLOGICAL/ADOPTIVE)) if the {PERSON} is male.
   
   
7. If the {RU MEMBER} is {PERSONS} '7' (HUSBAND/WIFE/SPOUSE) then autocode the reciprocal relationship to '7' (HUSBAND/WIFE/SPOUSE).
   
   
8. If the {RU MEMBER} is {PERSONS} '8' (UNMARRIED PARTNER) then autocode the reciprocal relationship to '8' (UNMARRIED PARTNER).
   
   
9. If the {RU MEMBER} is {PERSONS} '9' (MOTHER-IN-LAW) then autocode the reciprocal relationship to '13' (DAUGHTER-IN-LAW) if the {PERSON} is female, or '14' (SON-IN-LAW) if the {PERSON} is male.
   
   
10. If the {RU MEMBER} is {PERSONS} '10' (FATHER-IN-LAW) then autocode the reciprocal relationship to '13' (DAUGHTER-IN-LAW) if the {PERSON} is female, or '14' (SON-IN-LAW) if the {PERSON} is male.
    
    
11. If the {RU MEMBER} is {PERSONS} '11' (SISTER-IN-LAW) then autocode the reciprocal relationship to '11' (SISTER-IN-LAW) if the {PERSON} is female, or '12' (BROTHER-IN-LAW) if the {PERSON} is male.
    
    
12. If the {RU MEMBER} is {PERSONS} '12' (BROTHER-IN-LAW) then autocode the reciprocal relationship to '11' (SISTER-IN-LAW) if the {PERSON} is female, or '12' (BROTHER-IN-LAW) if the {PERSON} is male.
    
    
13. If the {RU MEMBER} is {PERSONS} '13' (DAUGHTER-IN-LAW) then autocode the reciprocal relationship to '9' (MOTHER-IN-LAW) if the {PERSON} is female, or '10' (FATHER-IN-LAW) if the {PERSON} is male.
    
    
14. If the {RU MEMBER} is {PERSONS} '14' (SON-IN-LAW) then autocode the reciprocal relationship to '9' (MOTHER-IN-LAW) if the {PERSON} is female, or '10' (FATHER-IN-LAW) if the {PERSON} is male.
    
    
15. If the {RU MEMBER} is {PERSONS} '15' (STEPMOTHER) then autocode the reciprocal relationship to '17' (STEPDAUGHTER) if the {PERSON} is female, or '18' (STEPSON) if the {PERSON} is male.
    
    
16. If the {RU MEMBER} is {PERSONS} '16' (STEPFATHER) then autocode the reciprocal relationship to '17' (STEPDAUGHTER) if the {PERSON} is female, or '18' (STEPSON) if the {PERSON} is male.
    
    
17. If the {RU MEMBER} is {PERSONS} '17' (STEPDAUGHTER) then autocode the reciprocal relationship to '15' (STEPMOTHER) if the {PERSON} is female, or '16' (STEPFATHER) if the {PERSON} is male.
    
    
18. If the {RU MEMBER} is {PERSONS} '18' (STEPSON) then autocode the reciprocal relationship to '15' (STEPMOTHER) if the {PERSON} is female, or '16' (STEPFATHER) if the {PERSON} is male.
    
    
19. If the {RU MEMBER} is {PERSONS} '19' (GRANDMOTHER) then autocode the reciprocal relationship to '27' (GRANDDAUGHTER) if the {PERSON} is female, or '26' (GRANDSON) if the {PERSON} is male.
    
    
20. If the {RU MEMBER} is {PERSONS} '20' (GRANDFATHER) then autocode the reciprocal relationship to '27' (GRANDDAUGHTER) if the {PERSON} is female, or '26' (GRANDSON) if the {PERSON} is male.
    
    
21. If the {RU MEMBER} is {PERSONS} '21' (AUNT) then autocode the reciprocal relationship to '23' (NIECE) if the {PERSON} is female, or '24' (NEPHEW) if the {PERSON} is male.
    
    
22. If the {RU MEMBER} is {PERSONS} '22' (UNCLE) then autocode the reciprocal relationship to '23' (NIECE) if the {PERSON} is female, or '24' (NEPHEW) if the {PERSON} is male.
    
    
23. If the {RU MEMBER} is {PERSONS} '23' (NIECE) then autocode the reciprocal relationship to '21' (AUNT) if the {PERSON} is female, or '22' (UNCLE) if the {PERSON} is male.
    
    
24. If the {RU MEMBER} is {PERSONS} '24' (NEPHEW) then autocode the reciprocal relationship to '21' (AUNT) if the {PERSON} is female, or '22' (UNCLE) if the {PERSON} is male.
    
    
25. If the {RU MEMBER} is {PERSONS} '25' (COUSIN) then autocode the reciprocal relationship to '25' (COUSIN).
    
    
26. If the {RU MEMBER} is {PERSONS} '26' (GRANDSON) then autocode the reciprocal relationship to '19' (GRANDMOTHER) if the {PERSON} is female, or '20' (GRANDFATHER) if the {PERSON} is male.
    
    
27. If the {RU MEMBER} is {PERSONS} '27' (GRANDDAUGHTER) then autocode the reciprocal relationship to '19' (GRANDMOTHER) if the {PERSON} is female, or '20' (GRANDFATHER) if the {PERSON} is male.
    
    
28. If the {RU MEMBER} is {PERSONS} '28' (PARTNER OF {PERSON}’S PARENT) then autocode the reciprocal relationship to '30' (DAUGHTER OF {PERSON LOOPING ON}'s PARTNER) if the {PERSON} is female, or '31' (SON OF {PERSON LOOPING ON}'s PARTNER) if the {PERSON} is male.
    
    
29. If the {RU MEMBER} is {PERSONS} '30' (DAUGHTER OF {PERSON LOOPING ON}'s PARTNER) then autocode the reciprocal relationship to '28' (PARTNER OF {PERSON}’S PARENT).
    
    
30. If the {RU MEMBER} is {PERSONS} '31' (SON OF {PERSON LOOPING ON}'s PARTNER) then autocode the reciprocal relationship to '28' (PARTNER OF {PERSON}‘S PARENT).
    
    
31. If the {RU MEMBER} is {PERSONS} '32' (GREAT GRANDMOTHER) then autocode the reciprocal relationship to '38' (GREAT GRANDDAUGHTER) if the {PERSON} is female, or '39' (GREAT GRANDSON) if the {PERSON} is male.
    
    
32. If the {RU MEMBER} is {PERSONS} '33' (GREAT GRANDFATHER) then autocode the reciprocal relationship to '38' (GREAT GRANDDAUGHTER) if the {PERSON} is female, or '39' (GREAT GRANDSON) if the {PERSON} is male.
    
    
33. If the {RU MEMBER} is {PERSONS} '38' (GREAT GRANDDAUGHTER) then autocode the reciprocal relationship to '32' (GREAT GRANDMOTHER) if the {PERSON} is female, or '33' (GREAT GRANDFATHER) if the {PERSON} is male.
    
    
34. If the {RU MEMBER} is {PERSONS} '39' (GREAT GRANDSON) then autocode the reciprocal relationship to '32' (GREAT GRANDMOTHER) if the {PERSON} is female, or '33' (GREAT GRANDFATHER) if the {PERSON} is male.
    
    
35. If the {RU MEMBER} is {PERSONS} '34' (FOSTER MOTHER) then autocode the reciprocal relationship to '36' (FOSTER DAUGHTER) if the {PERSON} is female, or '37' (FOSTER SON) if the {PERSON} is male.
    
    
36. If the {RU MEMBER} is {PERSONS} '35' (FOSTER FATHER) then autocode the reciprocal relationship to '36' (FOSTER DAUGHTER) if the {PERSON} is female, or '37' (FOSTER SON) if the {PERSON} is male.
    
    
37. If the {RU MEMBER} is {PERSONS} '36' (FOSTER DAUGHTER) then autocode the reciprocal relationship to '34' (FOSTER MOTHER) if the {PERSON} is female, or '35' (FOSTER FATHER) if the {PERSON} is male.
    
    
38. If the {RU MEMBER} is {PERSONS} '37' (FOSTER SON) then autocode the reciprocal relationship to '34' (FOSTER MOTHER) if the {PERSON} is female, or '35' (FOSTER FATHER) if the {PERSON} is male.
    
    
39. If the {RU MEMBER} is {PERSONS} '91' (OTHER RELATED (NO SPECIFY)) then autocode the reciprocal relationship to '91' (OTHER RELATED (NO SPECIFY) ). If the {RU MEMBER} is {PERSONS} '99' (NOT RELATED) then autocode the reciprocal relationship to '99' (NOT RELATED).

Soft check:

1. If code '1' (MOTHER (BIOLOGICAL/ADOPTIVE)) or '2' (FATHER (BIOLOGICAL/ADOPTIVE)) is used more than once to describe the relationship between a RU member and the person being looped on at LOOP_70, display the following message: "MOTHER/FATHER ALREADY USED. VERIFY AND RE-ENTER."
   
   
2. If code '7' (HUSBAND/WIFE/SPOUSE) is used more than once to describe the relationship between a RU member and the person being looped on at LOOP_70, display the following message: "HUSBAND/WIFE/SPOUSE ALREADY USED. VERIFY AND RE- ENTER."
   
   
3. If code '15' (STEPMOTHER) or '16' (STEPFATHER) and the age of the ‘RU MEMBER’ associated with code is younger than person being looped on at LOOP_70, display the following message: "UNLIKELY RESPONSE DUE TO AGE. VERIFY AND RE-ENTER." Do not display the message for age ranges or age guesses.
   
   
4. If code '99' (NOT RELATED) is selected, display the following message: "THIS PERSON HAS BEEN CODED AS NOT RELATED. PROBE RESPONDENT AND REVIEW CODES. IF APPLICABLE, USE A MORE DESCRIPTIVE CODE OR USE CODE '91' (OTHER RELATED, NO SPECIFY). IF RESPONDENT CONFIRMS PERSON IS NOT RELATED, CONTINUE ENTERING OTHER RELATIONSHIPS."

Hard check:

1. If code '1' (MOTHER (BIOLOGICAL/ADOPTIVE)), '2' (FATHER (BIOLOGICAL/ADOPTIVE)), '19' (GRANDMOTHER), '20' (GRANDFATHER), '32' (GREAT GRANDMOTHER), '33' (GREAT GRANDFATHER), '34' (FOSTER MOTHER), or '35' (FOSTER FATHER), the age of the 'RU MEMBER' associated with the code must be older than the person being looped on at LOOP_70. Display the following error message: "DISALLOWED RELATIONSHIP. {RU MEMBER} CAN'T BE {PERSON}'S {RELATION} GIVEN THAT THE AGE OF {RU MEMBER } IS LESS THAN THE AGE OF {PERSON }. VERIFY AND RE-ENTER." 'RELATION' should be filled with the relationship that was selected at RE900. 'RU MEMBER NAME' should be filled with the RU members first and last name (RU member from LOOP_75). 'PERSON' should be filled with the person being looped on's first and last name from LOOP_70. Do not display the message for age ranges or age guesses.
   
   
2. If code '36' (FOSTER DAUGHTER) or '37' (FOSTER SON), the age of the 'RU MEMBER' associated with the code must be 18 years of age or younger or in age categories 1-4. Display the following error message: "A FOSTER DAUGHTER/SON CAN'T BE MORE THAN 18 YEARS OLD. VERIFY AND RE-ENTER."
   
   
3. If code '5' (DAUGHTER/ADOPTED DAUGHTER), '6' (SON/ADOPTED SON), '27' (GRANDDAUGHTER), '26' (GRANDSON), '38' (GREAT GRANDDAUGHTER), '39' (GREAT GRANDSON), '36' (FOSTER DAUGHTER), or '37' (FOSTER SON), the age of the 'RU MEMBER' associated with the code must be younger than the person being looped on at LOOP_70. Display the following error message: "DISALLOWED RELATIONSHIP. {RU MEMBER} CAN'T BE {PERSON}'S {RELATION} GIVEN THAT THE AGE OF {RU MEMBER } IS GREATER THAN THE AGE OF {PERSON }. VERIFY AND RE-ENTER." Do not display the message for age ranges or age guesses. 'RELATION' should be filled with the relationship that was selected at RE900. 'RU MEMBER NAME' should be filled with the RU members first and last name (RU member from LOOP_75). 'PERSON' should be filled with the person being looped on's first and last name from LOOP_70.

Display Instructions: Display all instances of RE900 for the person being looped on at LOOP_70 in the same form pane.

Display first, middle, and last name for {PERSON} in ‘I would like to know how everyone is related to {you/{PERSON}}.’

For ‘{RU MEMBER} {is/was} (PERSON)'s’ in the question text, display the first, middle, and last name of the person being looped on at LOOP_75 for {RU MEMBER} and display the first name of the person being looped on at LOOP_70 for {PERSON}.

Display ‘I would like to know how everyone is related to {you/{PERSON}}.’ in lighter “grayed-out” text and brackets, after the first relationship question for person being looped on at LOOP_70.

Display ‘is’ if both persons are living. Display ‘was’ if both or either person is deceased.

Display only the gender appropriate set of response codes, dependent on the gender of the changing RU member or NEW STUDENT when the gender is known (Gender <>DK, RF or EMPTY). When gender is unknown display all codes other display gender appropriate response codes.

The female appropriate codes are ‘5’ (DAUGHTER/ADOPTED DAUGHTER), ‘1’ (MOTHER (BIOLOGICAL/ADOPTIVE)), ‘3’ (SISTER/STEP-/HALF-), ‘19’ (GRANDMOTHER), ‘27’ (GRANDDAUGHTER), ‘21’ (AUNT), ‘23’ (NIECE), ‘15’ (STEPMOTHER), ‘17’ (STEPDAUGHTER), ‘9’ (MOTHER-IN-LAW), ‘11’ (SISTER-IN- LAW), ‘13’ (DAUGHTER-IN-LAW), ‘30’ (DAUGHTER OF {PERSON LOOPING ON}’s PARTNER), ‘32’ (GREAT GRANDMOTHER), ‘34’ (FOSTER MOTHER), ‘36’ (FOSTER DAUGHTER), '38' (GREAT GRANDDAUGHTER), and '44' (FOSTER SISTER). The male appropriate codes are ‘6’ (SON/ADOPTED SON), ‘2’ (FATHER (BIOLOGICAL/ADOPTIVE)), ‘4’ (BROTHER/STEP-/HALF-), ‘20’ (GRANDFATHER), ‘26’ (GRANDSON), ‘22’ (UNCLE), ‘24’ (NEPHEW), ‘16’ (STEPFATHER), ‘18’ (STEPSON), ‘10’ (FATHER-IN-LAW), ‘12’ (BROTHER-IN-LAW), ‘14’ (SON-IN-LAW), ‘31’ (SON OF {PERSON LOOPING ON}’s PARTNER), ‘33’ (GREAT GRANDFATHER), ‘35’ (FOSTER FATHER), ‘37’ (FOSTER SON), '39' (GREAT GRANDSON), and '45' (FOSTER BROTHER).

Categories ‘7’ (HUSBAND/WIFE/SPOUSE), ‘8’ (UNMARRIED PARTNER), ‘25’ (COUSIN), ‘28’ (PARTNER OF {PERSON}’S PARENT), ‘91’ (OTHER RELATED (NO SPECIFY)) and ‘99’ (NOT RELATED) are always displayed regardless of gender.

For categories ‘28’ (PARTNER OF {PERSON}’S PARENT), ‘31’ (SON OF {PERSON LOOPING ON}'s PARTNER), and ‘30’ (DAUGHTER OF {PERSON LOOPING ON}'s PARTNER) fill {PERSON} with the first name of the person being looped on at LOOP_70.

Display two balanced columns of 13 options each without scrolling.

Do not display '40' (GREAT AUNT), '41' (GREAT UNCLE), '42' (GREAT NIECE), and '43' (GREAT NEPHEW) in the answer pane.

END_LP75 (REB1028)

BOX_290 (REB1045)

RE910 (REB1085)

BLAISE NAME: Guardian

Context Header: {PERSON’S FIRST, MIDDLE AND LAST NAME}

Question Text:

I have recorded that {you/{PERSON}} {do/does} not have a mother or father living in this household. {Do/Does} {you/he/she} have a legal guardian living in this household?

HELP: F1

Responses: YES 1 RE920 (REB1090)

NO 2 END_LP70 (REB1095)

REFUSED RF END_LP70 (REB1095)

DON'T KNOW DK END_LP70 (REB1095)

Display Instructions:

RE920 (REB1090)

BLAISE NAME: GuardianPID

Context Header: {PERSON’S FIRST, MIDDLE AND LAST NAME}

Question Text:

Who is {your/{PERSON}'s legal guardian?

Responses: {FIRST NAME, [MIDDLE NAME], LAST NAME}1 1 END_LP70 (REB1095)

{FIRST NAME, [MIDDLE NAME], LAST NAME}2 2 END_LP70 (REB1095)

{FIRST NAME, [MIDDLE NAME], LAST NAME}3 3 END_LP70 (REB1095)

{FIRST NAME, [MIDDLE NAME], LAST NAME}4 4 END_LP70 (REB1095)

{FIRST NAME, [MIDDLE NAME], LAST NAME}N 5 END_LP70 (REB1095)

Programmer Instructions:

Display Instructions: Roster 2- no add/edit/delete

Roster definition:

This item displays RU-members-roster for selection of legal guardian.

Roster Filter:

Display only those persons who are 18 years of age or older or in age categories 4-9 on the RE_Person Array where MostRecentRU=RUUnit who meet the following conditions:

-CtrlCurrHere_AtBOX270 = YES

AND

-[RE190 is NOT coded ‘3’ (DECEASED) or RE340 is NOT coded ‘5’ (IF VOLUNTEERED:

DECEASED)]

AND

-is not the person being looped on.

END_LP70 (REB1095)

RE930 (REB1100)

BLAISE NAME: RelConf

Question Text:

INTERVIEWER: REVIEW THE RELATIONSHIPS BELOW.

READ GRID STARTING FROM LEFT. EXAMPLE: "(NAME ON LEFT) IS (NAME ALONG TOP)'S ___ (RELATIONSHIP)."

{TO VIEW RELATIONSHIP GRID PRESS CTRL-X

TO CLOSE RELATIONSHIP GRID PRESS ESC}

MEMBER NAME | RU MEMBER 1 | RU MEMBER 2 | RU MEMBER 3 |

1. FIRST | [DISPLAY | [DISPLAY | [DISPLAY |

NAME - 15 | RELATIONSHIP] | RELATIONSHIP] | RELATIONSHIP] |

2. FIRST | [DISPLAY | [DISPLAY | [DISPLAY |

NAME - 15 | RELATIONSHIP] | RELATIONSHIP] | RELATIONSHIP] |

3. FIRST | [DISPLAY | [DISPLAY | [DISPLAY |

NAME - 15 | RELATIONSHIP] | RELATIONSHIP] | RELATIONSHIP] |

Responses: CONTINUE 1 BOX_320 (REB1105)

Programmer Instructions: Roster Behavior:

1. The column heading ‘MEMBER NAME’ should display the respondent or the reference person if proxy respondent and then all remaining RU members from oldest to youngest using the Age Order specifications in the GL section.
   
   
2. Display all relationships coded previously and up to this point, including reciprocal relationships.
   
   
3. Display RF or DK for relationships coded 'RF' (REFUSED) or 'DK' (DON'T KNOW).

If RU member respondent, create a family subunit based on RU members relationship to the respondent; if proxy respondent, create family subunit based on RU members relationship to reference person.

Include the RU member in the subunit if they are:

- Respondent/reference person

- Spouse/partner of the respondent/reference person (RE900= ‘7’ HUSBAND/WIFE/SPOUSE or ‘8’ UNMARRIED PARTNER)

- Bio/step/adopted children ≤ 20 of the respondent/reference person (RE900 = 5 DAUGHTER/ADOPTED DAUGHTER, ‘6’ SON/ADOPTED SON, ’17’STEPDAUGHTER, or ‘18’, STEPSON and person is younger than 21 or in age categories 1-4.)

- If respondent/reference person has an UNMARRIED PARTNER, include the children < 20 of the unmarried partner (RE900 = '30' DAUGHTER OF {PERSON LOOPING ON}'s PARTNER, '31' SON OF {PERSON LOOPING ON}'s PARTNER) and person is younger than 21 or in age categories 1-4.)

- Children ≤ 17 in a legal guardian relationship with the respondent/reference person (Person is younger than 18 or in age categories 1-4 and at RE920 the respondent/reference person is selected as the legal guardian)

Otherwise, group all other RU members into a non-family subunit.

Display Instructions: Roster Definition: Roster 1- Report

This item displays the RU-members-roster and all persons flagged as “NEW STUDENTS”. The column headings 'RU MEMBER N' are filled with the RU members first name (RE_Person.Fname) and age (RE_Person.agernd) in parentheses. The column heading ‘MEMBER NAME’ is filled with the first name of the person being looped on (RE_Person.Fname) and age (RE_Person.agernd) in parentheses. Display MEMBER NAME’s relationship to RU MEMBER N. Display the preloaded (from the previous round, as available) relationship.

Roster Filter:

Display persons on the RE_Person Array where MostRecentRU=RUUnit who meet either of the

following conditions:

Person is a member of the RU (CtrlCurrHere_AtBOX270=Yes) or

Person is a ‘new student’ (StudentMoverAtLoop20=YES or StudentMoverAtLoop30=YES).

Display "TO VIEW RELATIONSHIP GRID PRESS CTRL-X TO CLOSE RELATIONSHIP GRID

PRESS ESC" if the number of RU members displayed is >=7 otherwise use a null display.

BOX_320 (REB1105)

RE940 (REB1110)

BLAISE NAME: NoInfoPersA

Question Text:

At this time, we are only collecting information about the people in this family. Therefore, that is all the information we will need about the non-related people who live here. We will not collect any additional information about (READ NAMES BELOW).

{1. First Name, [Middle Name], Last Name}1

{2. First Name, [Middle Name], Last Name}2

{3. First Name, [Middle Name], Last Name}3

{4. First Name, [Middle Name], Last Name}4

{5. First Name, [Middle Name], Last Name}N

PRESS 1 AND ENTER TO CONTINUE.

Responses: CONTINUE 1 BOX_330 (REB1115)

Programmer Instructions: Ctrl Variables impacted: CtrlEligible, CtrlCurrHere.

For each person displayed at RE940:

Set RemovedAtRE940=YES

Set MoverAtRE940=YES if person is key and not related (CtrlPersKey=YES and ‘99’ NOT RELATED FOR RELATIONSHIP WITH REFERENCE PERSON at RE900). Person is treated as a mover.

Note: Person is treated as a mover. This person is not currently here, but in-scope and eligible to be interviewed as part of another RU from the date of their previous interview until that new interview date. The RE section will collect locating information for this person, but person will not be included in this interview after the RE section. Information for person will be collected as part of another RU.

Set MoverAtRE940=NO if [StudentMoverAtLoop30=YES] and [OrigRnd=Current] and [‘99’ NOT RELATED FOR RELATIONSHIP WITH REFERENCE PERSON at RE900]

OR

Person is not key and not related (CtrlPersKey=NO and ‘99’ NOT RELATED FOR RELATIONSHIP WITH REFERENCE PERSON at RE900). Person is out-of-scope for this study. No information will be collected for this person.

OR

Person is a foster child (RE900 is coded ‘36’ (FOSTER DAUGHTER) or ‘37’ (FOSTER SON))

- Note: Person is not related to reference person and does not meet requirements of ‘New Student.’ Or Split. Person is not eligible, not currently here, and is out of scope for this study. No information will be collected for person in this RU or another RU.

Otherwise

- Keep MoverAt940 empty

Note if [StudentMoverAtLoop20=YES or StudentMoverAtLoop30 =YES] and [OrigRnd=0] and [‘99’ NOT RELATED FOR RELATIONSHIP WITH REFERENCE PERSON at RE900] (person remains a ‘New Student’)

Person remains a ‘New Student’. This person is not currently here, but at this point in the interview the student is eligible and in-scope for data collection in a student RU. The RE section will later determine if locating information for this student is necessary. Students are included for some items in RE but not the rest of the interview.

Display Instructions: Roster 1 - Report

Roster Definition:

This item displays persons for display only. Display the person’s first name, middle, and last names (RE_Person.FullName).

Roster Filter:

Display only persons who are not related to reference person (relationship to reference person coded ‘99’ (NOT RELATED)) at RE900

And

Persons where RE900 is coded ‘36’ (Foster Daughter) or ‘37’ (Foster Son).

BOX_330 (REB1115)

LOOP_80 (REB1120)

RE950 (REB1125)

BLAISE NAME: NHISAtSch

Context Header: {PERSON’S FIRST MIDDLE LAST NAME}

Question Text:

At the time of the National Health Interview Survey on {MONTH, DAY, YEAR OF NHIS INTERVIEW} {were/was} {you/{PERSON}} attending school?

Responses: YES 1 RE960 (REB1130)

NO 2 END_LP80 (REB1155)

REFUSED RF END_LP80 (REB1155)

DON'T KNOW DK END_LP80 (REB1155)

Display Instructions: For ‘{MONTH, DAY, YEAR OF NHIS INTERVIEW}’display the NHIS interview date (Preload.NHISDt).

RE960 (REB1130)

BLAISE NAME: NHISSchLevel

Context Header: {PERSON’S FIRST MIDDLE LAST NAME}

Question Text:

{Were/Was} {you/{PERSON}} attending grades 1-12, a college or university, or some other training school after high school?

HELP: F1

Responses: GRADES 1-12 1 END_LP80 (REB1155)

A COLLEGE OR UNIVERSITY 2

SOME OTHER TRAINING SCHOOL AFTER HIGH SCHOOL 3

REFUSED RF END_LP80 (REB1155)

DON'T KNOW DK END_LP80 (REB1155)

Programmer Instructions: If coded ‘2’ (COLLEGE) or ‘3’ (OTHER TRAINING SCHOOL) AND Person was not coded ‘NEVER MARRIED’ at NHIS interview (PL_Person.MaritalStatusR≠5), go to END_LP80.

If coded ‘2’ (COLLEGE) or ‘3’ (OTHER TRAINING SCHOOL) AND Person was coded ‘NEVER MARRIED’ at NHIS interview (PL_Person.MaritalStatusR=5), continue with RE970.

Display Instructions:

RE970 (REB1135)

BLAISE NAME:NHISParentRU2

Context Header: {PERSON’S FIRST MIDDLE LAST NAME}

Question Text:

At the time of the National Health Interview Survey on {MONTH, DAY, YEAR OF NHIS INTERVIEW} were either of {your/{PERSON}'s} parents living in this household?

Responses: YES 1 END_LP80 (REB1155)

NO 2 RE980 (REB1140)

REFUSED RF END_LP80 (REB1155)

DON'T KNOW DK END_LP80 (REB1155)

Display Instructions: For ‘{MONTH, DAY, YEAR OF NHIS INTERVIEW}’ display the NHIS interview date (Preload.NHISDt).

RE980 (REB1140)

BLAISE NAME: ParentOutHh

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

{Do/Does} {you/{PERSON}} have parents who live somewhere else?

Responses: YES 1 RE990 (REB1145)

NO 2 END_LP80 (REB1155)

REFUSED RF RE990 (REB1145)

DON'T KNOW DK RE990 (REB1145)

Display Instructions:

RE990 (REB1145)

BLAISE NAME: UsualResOrStu

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

Is this {your/{PERSON}'s} usual year-round place of residence or is this {your/his/her} place of residence only during the school year?

HELP: F1

Responses: USUAL YEAR-ROUND PLACE OF RESIDENCE 1 END_LP80 (REB1155)

RESIDENCE ONLY DURING SCHOOL YEAR 2 END_LP80 (REB1155)

SOME OTHER ARRANGEMENT 91 RE1000 (REB1150)

REFUSED RF RE1000 (REB1150)

DON'T KNOW DK RE1000 (REB1150)

Programmer Instructions: Control Variables Impacted: CtrlNewStudent, CtrlPersKey

Display Instructions:

RE1000 (REB1150)

BLAISE NAME: RspbHCare

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

Does someone in this household have primary responsibility for {your/{PERSON}'s} health and health care?

Responses: YES 1 END_LP80 (REB1155)

NO 2 END_LP80 (REB1155)

REFUSED RF END_LP80 (REB1155)

DON'T KNOW DK END_LP80 (REB1155)

Programmer Instructions: Control Variables Impacted: CtrlNewStudent, CtrlPersKey

Display Instructions:

END_LP80 (REB1155)

BOX_340 (REB1160)

RE1010 (REB1165)

BLAISE NAME: NoInfoPersB

Question Text:

At this time, we are only collecting information about persons who are usual year-round residents of this household and for whom we can collect health care information. Therefore, the remaining questions will not be asked about (READ NAMES BELOW).

{1. First Name, [Middle Name], Last Name} 1

{2. First Name, [Middle Name], Last Name} 2

{3. First Name, [Middle Name], Last Name} 3

{4. First Name, [Middle Name], Last Name} 4

{5. First Name, [Middle Name], Last Name} N

PRESS 1 AND ENTER TO CONTINUE.

Responses: CONTINUE 1 BOX_350 (REB1170)

Programmer Instructions:

Display Instructions: Roster 1 – Report Roster definition:

This item displays persons for display only. Display the person’s first, middle, and last names (RE_Person.FullName)

Roster filter:

Display only persons where RemovedAtLoop80=YES and StudentMoverAtLoop80=NO

BOX_350 (REB1170)

RE1020 (REB1180)

BLAISE NAME: EndInterviewStu

Question Text:

INTERVIEWER: THERE ARE NO ELIGIBLE INDIVIDUALS REMAINING IN THIS RU. PLEASE REPORT THIS SITUATION TO YOUR SUPERVISOR.

PRESS 1 AND ENTER TO END THE INTERVIEW.

Responses: CONTINUE 1

Display Instructions:

RE1030 (REB1190)

BLAISE NAME: HowIntvCompStu

Question Text:

INTERVIEWER: DID YOU COMPLETE THIS INTERVIEW IN-PERSON OR BY TELEPHONE? (YOU MUST HAVE SUPERVISOR APPROVAL PRIOR TO INTERVIEWING BY TELEPHONE.)

Responses: IN-PERSON 1

TELEPHONE 2

Programmer Instructions: If at least one person on RE_Person Array where MostRecentRU=RUUnit who is a ‘NEW STUDENT’ (CtrlNewStudent=Yes), go to RE1170_01.

Else if at least one person on RE_Person Array where MostRecentRU=RUUnit is a mover (MoverAtLoop10=YES, or MoverAtLoop20=YES, or MoverAtLoop_30=YES or MoverAtRE940= YES), go to RE1250.

Otherwise, go to BOX_470.

Display Instructions:

BOX_360 (REB1195)

RE1040 (REB1200)

BLAISE NAME: AnyFTADutyR1

Question Text:

{In addition to (READ NAMES BELOW), is/Is} anyone in the family currently serving on active duty in the Armed Forces of the United States?

{1. First Name, [Middle Name], Last Name} 1

{2. First Name, [Middle Name], Last Name} 2

{3. First Name, [Middle Name], Last Name} 3

{4. First Name, [Middle Name], Last Name} 4

{5. First Name, [Middle Name], Last Name} N

HELP: F1

Responses: YES 1 RE1050 (REB1205)

NO 2 BOX_390 (REB1305)

REFUSED RF BOX_390 (REB1305)

DON'T KNOW DK BOX_390 (REB1305)

Display Instructions: Roster 1 - Report

Roster definition:

This item displays RU-members-roster for display of RU-members. Display RU member's first, middle, and last names (RE_Person.FullName).

Roster filter:

Display persons who are coded as on full-time active duty in the military (CtrlTrackSummAtEnd_LP70=4, 5, or 6) display

If at least one person on the RU-members-roster is coded as on full-time active duty in the military (CtrlTrackSummAtEnd_LP70=4, 5, or 6) display 'In addition to…' and the screen instructions and roster. Otherwise, display 'Is' and do not display the screen instructions and roster.

RE1050 (REB1205)

BLAISE NAME: FTADutyR1

Question Text:

Who {else} is currently serving on active duty in the Armed Forces?

PROBE: Anyone else?

ENTER ALL THAT APPLY.

HELP: F1

Responses: {FIRST NAME, [MIDDLE NAME], LAST NAME}1 1 LOOP_90 (REB1210)

{FIRST NAME, [MIDDLE NAME], LAST NAME}2 2 LOOP_90 (REB1210)

{FIRST NAME, [MIDDLE NAME], LAST NAME}3 3 LOOP_90 (REB1210)

{FIRST NAME, [MIDDLE NAME], LAST NAME}4 4 LOOP_90 (REB1210)

{FIRST NAME, [MIDDLE NAME], LAST NAME}N 5 LOOP_90 (REB1210)

Programmer Instructions: Control Variables Impacted: CtrlTrackSumm.

Roster behavior:

1. Multiple select allowed.

Display Instructions: Roster 2 – no add/edit/delete

Roster definition:

This item displays RU-members-roster for selection. Display RU member's first, middle, and last names (RE_Person.FullName)

Roster filter:

Display only those persons who meet the following conditions:

- Is on the RE_Person Array where MostRecentRU=RUUnit and eligible to be interviewed as part of this RU (CtrlCurrHere_AtBOX350 =Yes and CtrlPersEligibleatBOX_350=Yes) and

- Is older than 16 and younger than 60 years of age or in age categories 4-8 and

- Is not already coded as Full Time Military (CtrlTrackSummAtEnd_LP70≠4, 5, or 6) and

- Is not deceased or institutionalized (CtrlTrackSummAtEnd_LP70 ≠1 or 2)], Display ‘else’ if a roster was displayed at RE1040.

Otherwise, use null display.

LOOP 90 (REB1210)

RE1055 (REB1215)

BLAISE NAME: FTADutyBefR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

Did {you/{PERSON}} enter full-time active duty service in the Armed Forces before January 1, {YEAR}?

Responses: YES 1 END_LP90 (REB1235)

NO 2 RE1060_01 (REB1230)

Programmer Instructions: DK and RF disallowed.

Display Instructions: For “YEAR” display first calendar year of the panel.

RE1060_01 (REB1230)

BLAISE NAME: FTADutyBegMMR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

On what date did {you/{PERSON}} enter full-time active duty service in the Armed Forces?

ENTER MONTH.

Responses: 1 RE1060_02 (REB1231)

Programmer Instructions: DK and RF disallowed for month.

Display Instructions: Display RE1060_01, RE1060_02, and RE1060_03 on same form pane.

RE1060_02 (REB1231)

BLAISE NAME: FTADutyBegDDR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

[On what date did {you/{PERSON}} enter full-time active duty service in the Armed Forces?]

ENTER DAY.

Responses: 1 RE1060_03 (REB1232)

REFUSED RF RE1060_03 (REB1232)

DON'T KNOW DK RE1060_03 (REB1232)

Display Instructions: Display RE1060_01, RE1060_02, and RE1060_03 on same form pane.

Display “On what date…Armed Forces” in lighter “grayed-out” text.

RE1060_03 (REB1232)

BLAISE NAME: FTADutyBegYYYYR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

[On what date did {you/{PERSON}} enter full-time active duty service in the Armed Forces?]

ENTER 4-DIGIT YEAR.

Responses: 1 END_LP90 (REB1235)

Programmer Instructions: Hard check: Date entered at RE1060_01 through RE1060_03 must be on or after January 1, {YEAR} (where {YEAR} is the first calendar year of the panel) and on or before interview date. If a date entered prior to January 1, {YEAR}, display the following message: "IF {PERSON} ENTERED FULL-TIME ACTIVE DUTY SERVICE PRIOR TO JANUARY 1, {YEAR}, BACK- UP TO RE1055 (FTADutyBefR1) AND REVIEW ENTRIES."

If a date after the interview date (EndRefDt) is entered, display the following message: "DATE MUST NOT BE AFTER {EndRefDt}. PLEASE ENTER A VALID DATE."

DK and RF disallowed for year.

Display Instructions: Display RE1060_01, RE1060_02, and RE1060_03 on same form pane.

Display “On what date…Armed Forces” in lighter “grayed-out” text.

END_LP90 (REB1235)

RE1070 (REB1245)

BLAISE NAME: AnyFTADutyNewNotR1

Question Text:

(Is/Are) (READ NAMES BELOW) currently serving on active duty in the Armed Forces of the United States?

{1. First Name, [Middle Name], Last Name} 1

{2. First Name, [Middle Name], Last Name} 2

{3. First Name, [Middle Name], Last Name} 3

{4. First Name, [Middle Name], Last Name} 4

{5. First Name, [Middle Name], Last Name} N

HELP: F1

Responses: YES 1 RE1080 (REB1250)

NO 2 BOX_380 (REB1280)

REFUSED RF BOX_380 (REB1280)

DON'T KNOW DK BOX_380 (REB1280)

Programmer Instructions:

Display Instructions: Roster 1 - Report

Roster definition:

This item displays RU-members-roster for display of RU-members. Display RU member's first, middle, and last names (RE_Person.FullName)

Roster filter:

Display only those persons who meet the following conditions:

-Person is on the RE_Person Array where MostRecentRU=RUUnit and eligible to be interviewed as part of this RU (CtrlCurrHere_AtBOX350 =Yes and CtrlPersEligibleatBOX_350=Yes) and

-Is older than 16 and younger than 60 years of age or in age categories 4-8 and

- Added to the RU this round, excluding merges [(RE_Person[].PreloadOrd = EMPTY) or (PersAddedBetweenRnds=YES)] AND (RE_Person[].MostRecentRU = RUUnit), and

- Is not deceased or institutionalized (CtrlTrackSummAtEnd_LP70 ≠1 or 2)].

RE1080 (REB1250)

BLAISE NAME: FTADutyNewNotR1

Question Text:

Who is currently serving on active duty in the Armed Forces?

PROBE: Anyone else?

ENTER ALL THAT APPLY.

HELP: F1

Responses: {FIRST NAME [MIDDLE NAME] LAST NAME}1 1 LOOP_100 (REB1255)

{FIRST NAME [MIDDLE NAME] LAST NAME}2 2 LOOP_100 (REB1255)

{FIRST NAME [MIDDLE NAME] LAST NAME}3 3 LOOP_100 (REB1255)

{FIRST NAME [MIDDLE NAME] LAST 4 NAME}4 4 LOOP_100 (REB1255)

{FIRST NAME [MIDDLE NAME] LAST NAME}N 5 LOOP_100 (REB1255)

Programmer Instructions: Control variables impacted: CtrlTrackSumm

Roster behavior:

1. Multiple select allowed.

Display Instructions: Roster 2 - Report

Roster definition:

This item displays RU-members-roster for display of RU-members. Display RU member's first, middle, and last names (RE_Person.FullName)

Roster filter:

Display only those persons who meet the following conditions:

-Person is on the RE_Person Array where MostRecentRU=RUUnit and eligible to be interviewed as part of this RU (CtrlCurrHere_AtBOX350 =Yes and CtrlPersEligibleatBOX_350=Yes) and

-Is older than 16 and younger than 60 years of age or in age categories 4-8 and

-Added to the RU this round, excluding merges [(RE_Person[].PreloadOrd = EMPTY) or

(PersAddedBetweenRnds=YES)] AND (RE_Person[].MostRecentRU = RUUnit), and

-Is not deceased or institutionalized (CtrlTrackSummAtEnd_LP70 ≠1 or 2)],

LOOP_100 (REB1255)

RE1085 (REB1265)

BLAISE NAME: FTADutyPrevR

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

Did {you/{PERSON}} enter full-time active duty service in the Armed Forces before {DATE OF PREVIOUS ROUND INTERVIEW }?

Responses: YES 1 END_LP100 (REB1275)

NO 2 RE1090_01 (REB1270)

Programmer Instructions: DK and RF disallowed.

Display Instructions: For “DATE OF PREVIOUS ROUND INTERVIEW”, display date of previous round MEPS interview (Preload.RUEndM, RUEndD, RUEndY).

RE1090_01 (REB1270)

BLAISE NAME: FTADutyBegNewMMNotR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

On what date did {you/{PERSON}} enter full-time active duty service in the Armed Forces?

ENTER MONTH.

Responses: 1 RE1090_02 (REB1271)

Programmer Instructions: DK and RF disallowed for month.

Display Instructions: Display RE1090_01, RE1090_02, and RE1090_03 on same form pane.

RE1090_02 (REB1271)

BLAISE NAME: FTADutyBegNewDDNotR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

[On what date did {you/{PERSON}} enter full-time active duty service in the Armed Forces?]

ENTER DAY.

Responses: 1 RE1090_03 (REB1272)

REFUSED RF RE1090_03 (REB1272)

DON'T KNOW DK RE1090_03 (REB1272)

Display Instructions: Display RE1090_01, RE1090_02, and RE1090_03 on same form pane.

Display “On what date…Armed Forces” in lighter “grayed-out” text.

RE1090_03 (REB1272)

BLAISE NAME: FTADutyBegNewYYYYNotR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

[On what date did {you/{PERSON}} enter full-time active duty service in the Armed Forces?]

ENTER 4-DIGIT YEAR.

Responses: 1 END_LP100 (REB1275)

Programmer Instructions: DK and RF disallowed for year.

Hard check:

Edit (for round 5): date must be on or before 12/31/{YEAR}, where 'YEAR' is the second calendar year of the panel. If a date after 12/31/{YEAR} is entered, display the following message: "DATE MUST BE ON OR BEFORE 12/31/{YEAR}. IF PERSON WAS ONLY FULL-TIME MILITARY AFTER 12/31/{YEAR}, BACK-UP AND CHANGE RESPONSE TO RE1080 (FTADutyNewNotR1)."

Display Instructions: Display RE1090_01, RE1090_02, and RE1090_03 on same form pane.

Display “On what date…Armed Forces” in lighter “grayed-out” text.

END_LP100 (REB1275)

BOX_380 (REB1280)

LOOP_110 (REB1285)

RE1100 (REB1290)

BLAISE NAME: FTADutyNotNewNotR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

{{Is/Are}/{Was/Were}} {you/{PERSON}} currently serving on full-time active duty in the Armed Forces of the United States {on December 31, {YEAR}}?

HELP: F1

Responses: YES 1

NO 2 END_LP110 (REB1300)

REFUSED RF END_LP110 (REB1300)

DON'T KNOW DK END_LP110 (REB1300)

Programmer Instructions: Control Variables Impacted: CtrlTrackSumm

If coded ‘1’ (YES) and person had a previous round status of full-time military (PL_Person.FTADuty=YES) go to END_LP110.

Otherwise, continue with RE1110_01.

Display Instructions: Display ‘(Is/Are)’ if not round 5. Display ‘(Was/Were)’ if round 5.

Display ‘on December 31, {YEAR}, where 'YEAR' is the second calendar year of the panel, if round 5.

Otherwise, use a null display.

RE1110_01 (REB1295)

BLAISE NAME: FTADutyBegNotNewMMNotR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

On what date did {you/{PERSON}} enter full-time active duty service in the Armed Forces?

ENTER MONTH.

Responses: 1 RE1110_02 (REB1296)

Programmer Instructions: DK and RF disallowed for month.

Display Instructions: Display RE1110_01, RE1110_02, and RE1110_03 on same form pane.

RE1110_02 (REB1296)

BLAISE NAME: FTADutyBegNotNewDDNotR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

[On what date did {you/{PERSON}} enter full-time active duty service in the Armed Forces?]

ENTER DAY.

Responses: 1 RE1110_03 (REB1297)

REFUSED RF RE1110_03 (REB1297)

DON'T KNOW DK RE1110_03 (REB1297)

Display Instructions: Display RE1110_01, RE1110_02, and RE1110_03 on same form pane.

Display “On what date…Armed Forces” in lighter “grayed-out” text.

RE1110_03 (REB1297)

BLAISE NAME: FTADutyBegNotNewYYYYNotR1

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

[On what date did {you/{PERSON}} enter full-time active duty service in the Armed Forces?]

ENTER 4-DIGIT YEAR.

Responses: 1 END_LP110 (REB1300)

Programmer Instructions: DK and RF disallowed for year.

Hard check:

Edit (for round 5): date must be on or before 12/31/{YEAR}, where 'YEAR' is the second calendar year of the panel. If a date after 12/31/{YEAR} is entered, display the following message: "DATE MUST BE ON OR BEFORE 12/31/{YEAR}. IF PERSON WAS ONLY FULL-TIME MILITARY AFTER 12/31/{YEAR}, BACK-UP AND CHANGE RESPONSE TO RE1100 (FTADutyNotNewNotR1)."

Display Instructions: Display RE1110_01, RE1110_02, and RE1110_03 on same form pane.

Display “On what date…Armed Forces” in lighter “grayed-out” text.

END_LP110 (REB1300)

BOX_390 (REB1305)

RE1120 (REB1310)

BLAISE NAME: HonDischADuty

Question Text:

{Have/Has} (READ NAMES BELOW) ever been honorably discharged from active duty in the U.S. Army, Navy, Air Force,

Marine Corps or Coast Guard?

{1. First Name, [Middle Name], Last Name} 1

{2. First Name, [Middle Name], Last Name} 2

{3. First Name, [Middle Name], Last Name} 3

{4. First Name, [Middle Name], Last Name} 4

{5. First Name, [Middle Name], Last Name} N

HELP: F1

Responses: YES 1 RE1130 (REB1315)

NO 2 BOX_400 (REB1320)

REFUSED RF BOX_400 (REB1320)

DON'T KNOW DK BOX_400 (REB1320)

Display Instructions: Display "Has" when only one name listed; Display "Have" when more than one name listed.

Roster 1 - Report

Roster definition:

This item displays the RU-members-roster for display of RU- members. Display RU member's first, middle, and last names (RE_Person.FullName)

Roster filter:

This item displays all persons who meet all of the following conditions:

If round 1 AND:

- Person is on the RE_Person Array where MostRecentRU=RUUnit and eligible to be interviewed as part of this RU (CtrlCurrHere_AtBOX350 =Yes and CtrlPersEligibleatBOX_350=Yes) and

- Is older than 16 years of age or in age categories 4-9 and

- Is not coded as full time active duty (CtrlTrackSumm ≠4, 5, 6, or 14)

OR

If round 2-5: AND

- Person is on the RE_Person Array where MostRecentRU=RUUnit and eligible to be interviewed as part of this RU (CtrlCurrHere_AtBOX350 =Yes and CtrlPersEligibleAtBOX350=Yes)

AND

- Is older than 16 years of age or age in categories 4-9 AND Person in rounds 2-5 meets one of the following sets of conditions:

- Person added to the RU this round [(RE_Person[].PreloadOrd = EMPTY) or (PersAddedBetweenRnds=YES)] AND (RE_Person[].MostRecentRU = RUUnit) and

- Is not coded as full time active duty (CtrlTrackSumm ≠4, 5, 6, or 14)

OR

- Person not added to the RU or is a merge (RE_Person[].PreloadOrd <> EMPTY AND RE_Person[].PreloadRU <> EMPTY AND RE_Person[].MostRecentRU = RUUnit) and

- Was full-time activity duty in the previous round (PL_Person.FTADuty=YES) and

- Is not full-time active duty this round (CtrlTrackSumm ≠4, 5, 6, or 14)

RE1130 (REB1315)

BLAISE NAME: HonDischWho

Question Text:

Who was this?

PROBE: Anyone else?

ENTER ALL THAT APPLY.

Responses: {FIRST NAME [MIDDLE NAME] LAST NAME}1 1 BOX_400 (REB1320)

{FIRST NAME [MIDDLE NAME] LAST NAME}2 2 BOX_400 (REB1320)

{FIRST NAME [MIDDLE NAME] LAST NAME}3 3 BOX_400 (REB1320)

{FIRST NAME [MIDDLE NAME] LAST NAME}4 4 BOX_400 (REB1320)

{FIRST NAME [MIDDLE NAME] LAST NAME}N 5 BOX_400 (REB1320)

Programmer Instructions: Roster behavior:

1. Multiple select allowed.

Display Instructions: Roster 2 - no add/edit/delete

Roster definition:

This item displays the RU-Members-Roster for display of RU-members. Display RU member's first, middle, and last names (RE_Person.FullName)

Roster filter:

This item displays all persons who meet all of the following conditions:

If round 1 AND:

- Person is on the RE_Person Array where MostRecentRU=RUUnit and eligible to be interviewed as part of this RU (CtrlCurrHere_AtBOX350 =Yes and CtrlPersEligibleatBOX350=Yes) and

- Is older than 16 years of age or in age categories 4-9 and

- Is not coded as full time active duty (CtrlTrackSumm ≠4, 5, 6, or 14)

OR

If round 2-5: AND

- Person is on the RE_Person Array where MostRecentRU=RUUnit and eligible to be interviewed as part of this RU (CtrlCurrHere_AtBOX350 =Yes and CtrlPersEligibleatBOX_350=Yes) and

- Is older than 16 years of age or age in categories 4-9 AND Person in rounds 2-5 meets one of the following sets of conditions:

-Person added to the RU this round [(RE_Person[].PreloadOrd = EMPTY) or (PersAddedBetweenRnds=YES)] AND (RE_Person[].MostRecentRU = RUUnit) and

- Is not coded as full time active duty (CtrlTrackSumm ≠4, 5, 6, or 14)

OR

- Person not added to the RU or is a merge (RE_Person[].PreloadOrd <> EMPTY AND RE_Person[].PreloadRU <> EMPTY AND RE_Person[].MostRecentRU = RUUnit) and

- Was full-time activity duty in the previous round (PL_Person.FTADuty=YES) and

- Is not full-time active duty this round (CtrlTrackSumm ≠4, 5, 6, or 14)

BOX_400 (REB1320)

RE1140 (REB1325)

BLAISE NAME: EndInterviewFTADuty

Question Text:

INTERVIEWER: THERE ARE NO ELIGIBLE INDIVIDUALS REMAINING IN THIS RU. PLEASE REPORT THIS SITUATION TO YOUR SUPERVISOR.

PRESS 1 AND ENTER TO END THE INTERVIEW.

Responses: CONTINUE 1 RE1150 (REB1330)

Display Instructions:

RE1150 (REB1330)

BLAISE NAME: IntvwPersPhone

Question Text:

INTERVIEWER: DID YOU COMPLETE THIS INTERVIEW IN-PERSON OR BY TELEPHONE? (YOU MUST HAVE SUPERVISOR APPROVAL PRIOR TO INTERVIEWING BY TELEPHONE.)

Responses: IN-PERSON 1

TELEPHONE 2

Programmer Instructions: If at least one person who is key, eligible, and here on RE_Person Array where MostRecentRU=RUUnit where CtrlPersKey=YES, CtrlCurrHere=Yes, and CtrlPersEligible=YES, go to RE1170_01.

Otherwise, go to BOX_450.

Display Instructions:

RE1160 (REB1345)

BLAISE NAME: NoInfoPersC

Question Text:

At this time, we are collecting information only about some of the people in this family. Therefore, we will not collect any additional information about (READ NAMES BELOW).

{1. First Name, [Middle Name], Last Name} 1

{2. First Name, [Middle Name], Last Name} 2

{3. First Name, [Middle Name], Last Name} 3

{4. First Name, [Middle Name], Last Name} 4

{5. First Name, [Middle Name], Last Name} N

PRESS 1 AND ENTER TO CONTINUE.

Responses: CONTINUE 1 RE1170_01 (REB1355)

Programmer Instructions:

Display Instructions: Roster 1 - Report

Roster definition:

This item displays persons for display only. Display the person’s first, middle, and last names (RE_Person.FullName)

Roster filter:

Display persons who are Full-time military living in the RU without any other key civilians (RemovedAtBOX_400=YES) .

RE1170_01 (REB1355)

BLAISE NAME: MaritalStatRnd

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

{{Are/Is} {you/{PERSON}} now/As of December 31, {YEAR}, {were/was} {you/{PERSON}}} married, widowed, divorced, separated, or never married?

IF RESPONDENT SAYS 'SINGLE', PROBE: {{Are/Is} / {Were/Was}} {you/he/she} married, widowed, divorced, separated, or never married?

{PREVIOUS ROUND MARITAL STATUS: {DISPLAY PREVIOUS ROUND SELECTION}}

NAVIGATION: Complete the grid in order of respondent's answers.

HELP: F1

Responses: MARRIED 1

WIDOWED 2

DIVORCED 3

SEPARATED 4

NEVER MARRIED 5

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Preloaded Grid Type 2 including question RE1170_01, RE1170_02, RE1170_03, RE1170_04, RE1170_05, RE1170_06, RE1170_07, RE1170_08, RE1170_09, RE1170_10, RE1170_11, RE1170_12, and BOX_405.

Display RE1170_01 as an active cell for RU member, if RU member is age 16 or older or in age categories 4-9 and RE90=EMPTY. Otherwise, RE1170_01 is an inactive cell for RU member.

Display Instructions: Roster 1 - Report

Roster definition:

This item displays persons for entry of marital status, ethnicity, race, spoken language, and residency in the U.S. in the form pane.

Format form pane in columns with headers: RU Member, Marital Status, Ever Married, Hispanic Origin, Ethnicity, Race, Race Other Specify, Spoken Language, Other Language, Fluency, Born in U.S., Year Came to U.S., and Length in U.S. For RU Member: display RU member's first, middle, and last names (RE_Person.FullName)

Roster filter for RE1170_01 – RE1170_12:

Display person on the RE_Person Array where MostRecentRU=RUUnit who meet the following conditions:

-CtrlCurrHere=YES OR

-CtrlNewStudent=YES

Display '{Are/Is} {you/{PERSON}} now' AND '{Are/ Is}' if not round 5. Display 'As of December 31,{YEAR}, {were/was} {you/{PERSON}}' and '{Were/Was}', where 'YEAR' is the second calendar year of the panel, if round 5.

Display ‘{PREVIOUS ROUND MARITAL STATUS: {DISPLAY PREVIOUS ROUND SELECTION}}’, where {DISPLAY PREVIOUS ROUND SELECTION} is filled with the RU members marital status from the previous round (PL_Person.MaritalStatusR), if round 2-5. Otherwise use a null display.

Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_02 (REB1360)

BLAISE NAME: PastMarriage

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

I have recorded that {you/{PERSON}} {are/is} not married now. {Were/Was} {you/{PERSON}} ever married in the past?

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: YES 1

NO 2

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Leave marital status for this round the same as it was in the previous round, if ‘1’ (YES), 'RF' (REFUSED), or 'DK' (DON'T KNOW) selected.

Note: During MHOP, if RE1170_02 is coded ‘2’ (NO), set Person.MaritalStatusR to ‘5’ (NEVER MARRIED).

Display RE1170_02 as an active cell for RU member, if rounds 2-5 and RU members marital status changes from a code '1' (MARRIED), '2' (WIDOWED), '3' (DIVORCED), or '4' (SEPARATED) at RE1170_01 in the previous round to a code ‘5’ (NEVER MARRIED) at RE1170_01 for the current round. Otherwise, RE1170_02 is an inactive cell for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_03 (REB1370)

BLAISE NAME: PersHispLat

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

&RE-1.

Looking at show card RE-1, {are/is} {you/{PERSON}} Hispanic, Latino, or of Spanish origin?

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: YES 1

NO 2

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Display RE1170_03 as an active cell for person if ethnicity is missing (AskSpanEthnicity=Yes or Empty), Otherwise, RE1170_03 is an inactive cell for person.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_04 (REB1375)

BLAISE NAME: CodeAllHispLat

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

&RE-1.

Please look at this card RE-1 and tell me which group or groups best describes {your/{PERSON}'s} ethnic background.

ENTER ALL THAT APPLY.

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: MEXICAN 1

MEXICAN-AMERICAN/CHICANO 2

PUERTO RICAN 3

CUBAN/CUBAN AMERICAN 4

DOMINICAN 5

CENTRAL OR SOUTH AMERICAN 6

OTHER LATIN AMERICAN 7

OTHER HISPANIC, LATINO, OR SPANISH ORIGIN 8

REFUSED RF

DON'T KNOW DK

Programmer Instructions: For specifications purposes only: CAPI does not allow 'RF' (REFUSED) or 'DK' (DON'T KNOW) in combination with any other code.

Display RE1170_04 as an active cell for RU member, if RE1170_03 coded ‘1’ (YES).

Otherwise, RE1170_04 is an inactive cell for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_05 (REB1425)

BLAISE NAME: CodeAllRace

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

&RE-2.

For this survey, Hispanic origins are not races.

What is {your/{PERSON}'s} race? Please select one or more of the categories on card RE-2.

ENTER ALL THAT APPLY.

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: WHITE 1

BLACK OR AFRICAN AMERICAN 2

AMERICAN INDIAN OR ALASKA NATIVE 3

ASIAN INDIAN 4

CHINESE 5

FILIPINO 6

JAPANESE 7

KOREAN 8

VIETNAMESE 9

OTHER ASIAN 10

NATIVE HAWAIIAN 11

GUAMANIAN OR CHAMORRO 12

SAMOAN 13

OTHER PACIFIC ISLANDER 14

OTHER: SPECIFY 91

REFUSED RF

DON'T KNOW DK

Programmer Instructions: For specifications purposes only (CAPI handles automatically): 'RF' (REFUSED) and 'DK' (DON'T KNOW) not allowed in combination with any other codes.

Display RE1170_05 as an active cell for person if race is missing(AskRace=Yes or Empty). . Otherwise, RE1170_05 is an inactive cell for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_06 (REB1430)

BLAISE NAME: OthRaceOS

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

SPECIFY: OTHER RACE

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: 1

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Display RE1170_06 as an active cell for RU member, if RE1170_05 is coded '91' (OTHER: SPECIFY) alone or in combination with other codes. Otherwise, RE1170_06 is inactive cell for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_07 (REB1460)

BLAISE NAME: LangNotEng

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

{Do/Does} {you/{PERSON}} speak a language other than English at home?

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: YES 1

NO 2

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Display RE1170_07 as an active cell for persons who is 5 years of age or older or in age categories 3-9 and is not deceased or institutionalized (CtrlTrackSumm≠1 or 2) and if [(Round 1) or [(Rounds 2-5) and [(RE_Person[].PreloadOrd = EMPTY) or (PersAddedBetweenRnds = YES)] AND (RE_Person[].MostRecentRU = RUUnit)]] Otherwise, RE1170_07 is an inactive cell for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_08 (REB1465)

BLAISE NAME: OthLang

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

What is this language?

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: SPANISH 1

ANOTHER LANGUAGE 2

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Display RE1170_08 as an active cell for RU member, if RE1170_07 is coded = ‘1’ (YES).

Otherwise, RE1170_08 is an inactive cell for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_09 (REB1480)

BLAISE NAME: EngCompLevel

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

How well {do/does} {you/{PERSON}} speak English?

Would you say very well, well, not well, or not at all?

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: VERY WELL 1

WELL 2

NOT WELL 3

NOT AT ALL 4

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Display RE1170_09 as an active cell for RU member, if RE1170_07 is coded = '1' (YES).

Otherwise, RE1170_09 is an inactive cell for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_10 (REB1500)

BLAISE NAME: BornInUS

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

{Were/Was} {you/{PERSON}} born in the United States?

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: YES 1

NO 2

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Display RE1170_10 as an active cell for persons who is 5 years of age or older or in age categories 3-9 and is not deceased or institutionalized (CtrlTrackSumm≠1 or 2) and if [(Round 1) or [(Rounds 2-5) and [(RE_Person[].PreloadOrd = EMPTY) or (PersAddedBetweenRnds = YES)] AND (RE_Person[].MostRecentRU = RUUnit)]]

Otherwise, RE1170_10 is an inactive cell for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_11 (REB1505)

BLAISE NAME: YearEnterUS

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

In what year did {you/{PERSON}} come to the United States to stay?

IF NEEDED SAY:

Please give me only the most recent year that {you/{PERSON}} came to the United States to stay.

ENTER 4-DIGIT YEAR.

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: 1

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Hard edit:

Edit: If rounds 1-4, the year entered must be less than or equal to the current year and must be greater than or equal to the person’s birth year, if known. If round 5, year must be less than or equal to the second calendar year of the panel and must be greater than or equal to the person's birth year, if known. If year entered is greater than the current year or the second calendar year of the panel (if round 5), display the following message:"YEAR CANNOT BE AFTER {YEAR}.VERIFY AND RE-ENTER." For “YEAR” in the message, display the current year if Rounds 1-4. Display SecondPanYear if Round 5. If year entered is less than person’s year of birth, display the following message: "YEAR CANNOT BE BEFORE PERSON’S YEAR OF BIRTH. VERIFY AND RE-ENTER."

Display RE1170_11 as an active cell for RU members if RE1170_10 is coded = ‘2’ (NO).

Otherwise the RE1170_11 cell is inactive for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

RE1170_12 (REB1510)

BLAISE NAME: HowLongUS

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

About how long {have/has} {you/{PERSON}} lived in United States?

IF LESS THAN 1 YEAR, CODE 0.

ENTER YEARS.

NAVIGATION: Complete the grid in order of respondent's answers.

Responses: 1

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Hard range: 0-120

Range check: Number of years entered must be less than or equal to person’s age. If person’s age is represented by an age category, the number of years must be less than or equal to the top age limit for that category. If number of years entered is greater than person’s age, display the following message: "PERSON IS {XXX} YEARS OLD. NUMBER OF YEARS LIVING IN THE U.S. CANNOT BE MORE THAN PERSON’S AGE. VERIFY AND RE-ENTER."

Display RE1170_12 as an active cell for RU member, if RE1170_11 is coded DK = (DON’T KNOW). Otherwise RE1170_12 is an inactive cell for RU member.

Display Instructions: Display the interviewer instruction ‘NAVIGATION: Complete the grid in order of respondent's answers.’ In red text.

BOX_405 (REB1515)

Programmer Instructions: Before leaving the grid, CAPI should verify that all eligible fields per row of the grid have a valid answer entered. If not, display error message “ONE OR MORE QUESTIONS HAVE NOT BEEN ANSWERED. PRESS <OK> TO GO TO THE FIRST UNANSWERED QUESTION: {Question Tag} FOR {PERSON’S FIRST, MIDDLE AND LAST NAME}”. CAPI will move to the first unanswered item/field, starting from the top left of the grid and moving to the next unanswered item, left to right by row, until all are complete.

LOOP_120 (REB1520)

BOX_410 (REB1525)

RE1180 (REB1535)

BLAISE NAME: EduLevel

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

{As of December 31, {YEAR}, what/What} is the highest grade or year of regular school {you/ {PERSON}} ever completed?

Responses: NEVER ATTENDED SCHOOL/KINDERGARTEN ONLY 0

FIRST GRADE 1

SECOND GRADE 2

THIRD GRADE 3

FOURTH GRADE 4

FIFTH GRADE 5

SIXTH GRADE 6

SEVENTH GRADE 7

EIGHTH GRADE 8

NINTH GRADE 9

TENTH GRADE 10

ELEVENTH GRADE 11

TWELFTH GRADE (HIGH SCHOOL DIPLOMA) 12

FIRST YEAR 13

SECOND YEAR 14

THIRD YEAR 15

FOURTH YEAR (BACHELOR'S DEGREE) 16

FIVE OR MORE YEARS (GRADUATE DEGREE) 17

REFUSED RF

DON'T KNOW DK

Programmer Instructions: If coded '0' (NEVER ATTENDED SCHOOL/KINDERGARTEN ONLY) through '12' (TWELFTH GRADE (HIGH SCHOOL DIPLOMA)) and person = or > 16 or in age categories 4-9, continue with RE1190.

If coded '13' through '17' (college level), 'RF' (REFUSED), or 'DK' (DON'T KNOW), go to RE1200.

Otherwise, go to END_LP120.

Soft check: if coded '16' (FOURTH YEAR (BACHELOR'S DEGREE)) or '17' (FIVE OR MORE YEARS (GRADUATE DEGREE)) and person is < = 18 years of age (or in age categories 1-3), display the following message: "UNLIKELY RESPONSE DUE TO AGE. VERIFY AND RE-ENTER."

Display Instructions: Underline ‘highest’, ‘regular’, and ‘completed’ in the question text.

Display ‘What’ if not round 5. Display ‘As of December 31, {YEAR}, what’ if round 5, where 'year' is the second calendar year of the panel.

In addition:

Display the header "KINDERGARTEN OR LESS:" directly above answer text 'NEVER ATTENDED SCHOOL/KINDERGARTEN ONLY'.

Display the header "ELEMENTARY:" directly above answer text 'FIRST GRADE'. Indent each answer text a few spaces under this header.

Display the header "HIGH SCHOOL:" directly above answer text 'NINTH GRADE'. Indent each answer text a few spaces under this header.

Display the header "COLLEGE:" directly above answer text 'FIRST YEAR'. Indent each answer text a few spaces under this header.

RE1190 (REB1540)

BLAISE NAME: HghSchDiploma

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

{{Do/Does/Did}/As of December 31, {YEAR} did} {you/{PERSON}} have a high school diploma or {have/has/had} {you/{PERSON}} passed the GED equivalency test?

HELP: F1

Responses: HAVE HIGH SCHOOL DIPLOMA 1 END_LP120 (REB1550)

PASSED GED 2 END_LP120 (REB1550)

NEITHER HIGH SCHOOL DIPLOMA OR GED 3 END_LP120 (REB1550)

REFUSED RF END_LP120 (REB1550)

DON'T KNOW DK END_LP120 (REB1550)

Display Instructions: Display '{Do/Does/Did}' if not round 5. If round 5, display 'As of December 31, {YEAR}, did', where 'YEAR' is the second calendar year of the panel.

Display ‘Do’ if person is respondent and if round 1-4. Display ‘Does’ if person is not respondent and living and if Round 1-4. Display ‘Did’ if person is deceased and if round 1-4.

Display 'have' if person is respondent and if Round 1-4. Display 'has' if person is not respondent and living and if Round 1-4. Otherwise, display 'had'.

RE1200 (REB1545)

BLAISE NAME: HghestEduLevel

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

What is the highest educational degree {you/{PERSON}} obtained {as of December 31, {YEAR}}?

HELP: F1

Responses: BACHELOR'S DEGREE 1 END_LP120 (REB1550)

MASTER'S DEGREE 2 END_LP120 (REB1550)

DOCTORATE DEGREE 3 END_LP120 (REB1550)

NO DEGREE 4 END_LP120 (REB1550)

OTHER 91 END_LP120 (REB1550)

REFUSED RF END_LP120 (REB1550)

DON'T KNOW DK END_LP120 (REB1550)

Display Instructions: Display ‘as of December 31, {YEAR}’ if round 5, where 'YEAR' is the second calendar year of the panel. Otherwise, use a null display.

END_LP120 (REB1550)

BOX_420 (REB1555)

RE1210 (REB1575)

BLAISE NAME: AttendSch

Question Text:

{[Earlier you mentioned {you/{PERSON}} {were/was} living away at school in grades 1-12.]} {{Are/Is}/As of December 31,

{YEAR}, {were/was}} {you/{PERSON}} attending school full-time, part-time, or not attending school at all?

HELP: F1

Responses: FULL-TIME 1

PART-TIME 2

NOT IN SCHOOL 3

REFUSED RF

DON'T KNOW DK

Programmer Instructions: Preloaded Grid Type 1 including question RE1210.

Continue with BOX_430 once grid is complete.

Roster behavior:

Display persons who are age 17-23 inclusive or in age category 4 first on the roster.

Then display persons coded as living away at school grades 1-12.

Roster filter:

Display all persons on [(RE_Person Array where MostRecentRU=RUUnit where

CtrlCurrHere=YES and CtrlPersElgible=YES) and (that person meets one of the following conditions)]:

- Age 17-23, inclusive or in age category 4, or

- Coded as LIVING AWAY AT SCHOOL IN GRADES 1-12 (RE250=3, RE360=1, or RE580=1)

Display Instructions: Roster 1 - Report

Roster definition:

Display the RU-members-roster for entry of school status.

Col #1 Header: Name

Instructions: Display RU Members’ first, middle, and last names (RE_Person.FullName)

Col #2 header: School Status

Roster filter:

Display all persons who meet one of the following conditions:

- Age 17-23, inclusive or in age category 4, or

- Coded as LIVING AWAY AT SCHOOL IN GRADES 1-12 (RE250=3, RE360=1, or RE580=1),

Display '[Earlier you mentioned {you/{PERSON}} {were/was} living away at school in grades

1-12.]' if person being asked about is coded as living away at school in grades 1-12 (RE250=3, RE360=1, or RE580=1),. Otherwise, use null display.

Display '{Are/Is}' if not round 5. Display 'As of December 31, {YEAR}, {were/was}', where 'YEAR' is the second calendar year of the panel, if round 5.

BOX_430 (REB1580)

RE1220 (REB1585)

BLAISE NAME: PersInRU

Question Text:

THESE ARE NOW THE MEMBERS OF THE RU WHO WILL BE INCLUDED IN THIS INTERVIEW.

{FULL NAME OF REFERENCE PERSON}'S FAMILY:

RU MEMBER | KEYNESS | REFERENCE PERIOD |

1. First Name Middle |[Display |[Display Begin Date]-[Display End Date] |

Name Last Name-35 |Selection] | |

2. First Name Middle |[Display |[Display Begin Date]-[Display End Date] |

Name Last Name-35 |Selection] | |

3. First Name Middle |[Display |[Display Begin Date]-[Display End Date] |

Name Last Name-35 |Selection] | |

PRESS 1 AND ENTER TO CONTINUE

Responses: CONTINUE 1 BOX_440 (REB1600)

Display Instructions: Roster 1 - Report

Roster definition:

Col # 1 Header: RU MEMBER

Instructions: display RU members’ First, Middle, and Last names (RE_Person.FullName)

Col # 2 Header: KEYNESS

Instructions: display the RU member's keyness. Display ‘KEY’ if CtrlPersKey=YES; display ‘NOT

KEY’ if CtrlPersKey=NO.

Col # 3 Header: REFERENCE PERIOD

Instructions: Display RU member’s reference period begin and end dates displayed as ‘Month-3, DD, Year-4’ (RE_Person.BegRefM, RE_Person.BegRefD, RE_Person.BegRefY, RE_Person.EndRefM, RE_Person.EndRefD, RE_Person.EndRefY).

Roster filter:

Display all persons on RE_Person Array where MostRecentRU=RUUnit where CtrlCurrHere=YES and CtrlPersEligible=YES.

For 'FULL NAME OF REFERENCE PERSON' display the current round reference person's full name (first, middle, and last name) (RefPersPID). Do NOT substitute “you” if for reference person’s name.

BOX_440 (REB1600)

RE1230 (REB1605)

BLAISE NAME: StudSplit

Question Text:

We may conduct a separate interview with (READ NAMES BELOW) so I will not ask any further questions about them today.

{1. First Name, [Middle Name], Last Name} 1

{2. First Name, [Middle Name], Last Name} 2

{3. First Name, [Middle Name], Last Name} 3

{4. First Name, [Middle Name], Last Name} 4

{5. First Name, [Middle Name], Last Name} N

PRESS 1 AND ENTER TO CONTINUE.

Responses: CONTINUE 1 LOOP_130 (REB1610)

Display Instructions: Roster 1 - Report Roster definition:

This item displays persons for display only. Display person’s first, middle, and last names (RE_Person.FullName)

Roster filter:

Display all persons on RE_Person Array where MostRecentRU=RUUnit is a 'NEW STUDENT' (CtrlNewStudent=YES)

LOOP_130 (REB1610)

RE1240_01 (REB1615)

BLAISE NAME: StuStrt1

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

Please give me the address and telephone number where {PERSON} can be reached at school.

What is the address?

ENTER STREET ADDRESS.

Responses: 1 RE1240_02 (REB1616)

REFUSED RF RE1240_02 (REB1616)

DON'T KNOW DK RE1240_02 (REB1616)

Display Instructions: Display RE1240_01, RE1240_02, RE1240_03, RE1240_04, RE1240_05, and RE1240_06 on the same form pane.

RE1240_02 (REB1616)

BLAISE NAME: StuStrt2

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} can be reached at school.]

ENTER BUILDING OR ADDITIONAL ADDRESS INFORMATION, AS NECESSARY. IF NONE, PRESS ENTER.

Responses: 1 RE1240_03 (REB1617)

EMPTY Empty RE1240_03 (REB1617)

REFUSED RF RE1240_03 (REB1617)

DON'T KNOW DK RE1240_03 (REB1617)

Programmer Instructions: Allow empty as final response.

Display Instructions: Display RE1240_01, RE1240_02, RE1240_03, RE1240_04, RE1240_05, and RE1240_06 on the same form pane.

Display question text “Please give me…school” in brackets and “grayed-out” text.

RE1240_03 (REB1617)

BLAISE NAME: StuCity

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} can be reached at school.]

ENTER CITY.

Responses: 1 RE1240_04 (REB1618)

REFUSED RF RE1240_04 (REB1618)

DON'T KNOW DK RE1240_04 (REB1618)

Display Instructions: Display RE1240_01, RE1240_02, RE1240_03, RE1240_04, RE1240_05, and RE1240_06 on the same form pane.

Display question text “Please give me…school” in brackets and “grayed-out” text.

RE1240_04 (REB1618)

BLAISE NAME: StuSt

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} can be reached at school.]

ENTER STATE.

TYPE THE FIRST LETTER OF THE STATE, THEN USE ARROW KEYS IF NEEDED TO LOCATE STATE, AND PRESS ENTER TO SELECT.

Responses: 1 RE1240_05 (REB1619)

REFUSED RF RE1240_05 (REB1619)

DON'T KNOW DK RE1240_05 (REB1619)

Programmer Instructions: Use state lookup file.

Display Instructions: Display RE1240_01, RE1240_02, RE1240_03, RE1240_04, RE1240_05, and RE1240_06 on the same form pane.

Display question text “Please give me…school” in brackets and “grayed-out” text.

RE1240_05 (REB1619)

BLAISE NAME: StuZip

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} can be reached at school.]

ENTER ZIP CODE.

Responses: 1 RE1240_06 (REB1620)

REFUSED RF RE1240_06 (REB1620)

DON'T KNOW DK RE1240_06 (REB1620)

Programmer Instructions: Hard check: Exactly 5 digit numeric entry required. If less than 5 numeric digits entered or any characters entered that are not numeric, display the following message: "ZIP CODE ENTRY REQUIRES EXACTLY 5 NUMBERS. PROBE AND RE-ENTER OR ENTER F5 (DON'T KNOW) IF FULL ZIP CODE IS NOT KNOWN."

Display Instructions: Display RE1240_01, RE1240_02, RE1240_03, RE1240_04, RE1240_05, and RE1240_06 on the same form pane.

Display question text “Please give me…school” in brackets and “grayed-out” text.

RE1240_06 (REB1620)

BLAISE NAME: StuPhone

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} can be reached at school.]

ENTER TELEPHONE NUMBER. IF NO TELEPHONE, ENTER DK.

Responses: 1 END_LP130 (REB1621)

REFUSED RF END_LP130 (REB1621)

DON'T KNOW DK END_LP130 (REB1621)

Programmer Instructions: 10 digit entry required.

Use number input mask (xxx-xxx-xxxx) in the response field.

Hard check:

"PHONE ENTRY REQUIRES EXACTLY 10 NUMBERS. PROBE AND RE-ENTER OR

ENTER F5 (DON'T KNOW) IF FULL PHONE NUMBER IS NOT KNOWN."

Display Instructions: Display RE1240_01, RE1240_02, RE1240_03, RE1240_04, RE1240_05, and RE1240_06 on the same form pane.

Display question text “Please give me…school” in brackets and “grayed-out” text.

END_LP130 (REB1621)

BOX_450 (REB1625)

RE1250 (REB1630)

BLAISE NAME: FTADutySplit

Question Text:

We may (also) conduct a separate interview with (READ NAMES BELOW) so I will not ask any further questions about them today.

{1. First Name, [Middle Name], Last Name} 1

{2. First Name, [Middle Name], Last Name} 2

{3. First Name, [Middle Name], Last Name} 3

{4. First Name, [Middle Name], Last Name} 4

{5. First Name, [Middle Name], Last Name} N

PRESS 1 AND ENTER TO CONTINUE.

Responses: CONTINUE 1 LOOP_140 (REB1635)

Display Instructions: Roster 1 - Report Roster definition:

This item displays persons for display only. Display person’s first, middle, and last name (RE_Person.Fullname).

Roster filter:

Display all persons who are movers on RE_Person Array where MostRecentRU=RUUnit who meets any of the following conditions: :

-MoverAtLoop10=YES

-MoverAtLoop20=YES

-MoverAtLoop30=YES

-MoverAtRE940=YES

LOOP_140 (REB1635)

RE1260_01 (REB1640)

BLAISE NAME: MoveStrt1

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

Please give me the address and telephone number where {PERSON} has moved.

What is the address?

ENTER STREET ADDRESS.

Responses: 1 RE1260_02 (REB1641)

REFUSED RF RE1260_02 (REB1641)

DON'T KNOW DK RE1260_02 (REB1641)

Display Instructions: Display RE1260_01, RE1260_02, RE1260_03, RE1260_04, RE1260_05, and RE1260_06 on the same form pane.

RE1260_02 (REB1641)

BLAISE NAME: MoveStrt2

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} has moved.]

ENTER BUILDING OR ADDITIONAL ADDRESS INFORMATION, AS NECESSARY. IF NONE, PRESS ENTER.

Responses: 1 RE1260_03 (REB1642)

EMPTY Empty RE1260_03 (REB1642)

REFUSED RF RE1260_03 (REB1642)

DON'T KNOW DK RE1260_03 (REB1642)

Programmer Instructions: Allow empty.

Display Instructions: Display RE1260_01, RE1260_02, RE1260_03, RE1260_04, RE1260_05, and RE1260_06 on the same form pane.

Display question text “Please give me…moved” in brackets and “grayed out” text.

RE1260_03 (REB1642)

BLAISE NAME: MoveCity

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} has moved.]

ENTER CITY.

Responses: 1 RE1260_04 (REB1643)

REFUSED RF RE1260_04 (REB1643)

DON'T KNOW DK RE1260_04 (REB1643)

Display Instructions: Display RE1260_01, RE1260_02, RE1260_03, RE1260_04, RE1260_05, and RE1260_06 on the same form pane.

Display question text “Please give me…moved” in brackets and “grayed out” text.

RE1260_04 (REB1643)

BLAISE NAME: MoveSt

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} has moved.]

ENTER STATE.

TYPE THE FIRST LETTER OF THE STATE, THEN USE ARROW KEYS IF NEEDED TO LOCATE STATE, AND

PRESS ENTER TO SELECT.

Responses: 1 RE1260_05 (REB1644)

REFUSED RF RE1260_05 (REB1644)

DON'T KNOW DK RE1260_05 (REB1644)

Programmer Instructions: Use state lookup file.

Display Instructions: Display RE1260_01, RE1260_02, RE1260_03, RE1260_04, RE1260_05, and RE1260_06 on the same form pane.

Display question text “Please give me…moved” in brackets and “grayed out” text.

RE1260_05 (REB1644)

BLAISE NAME: MoveZip

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} has moved.]

ENTER ZIP CODE.

Responses: 1 RE1260_06 (REB1645)

REFUSED RF RE1260_06 (REB1645)

DON'T KNOW DK RE1260_06 (REB1645)

Programmer Instructions: Hard check: Exactly 5 digit numeric entry required. If less than 5 numeric digits entered or any characters entered that are not numeric, display the following message: "ZIP CODE ENTRY REQUIRES EXACTLY 5 NUMBERS. PROBE AND RE-ENTER OR ENTER F5 (DON'T KNOW) IF FULL ZIP CODE IS NOT KNOWN."

Display Instructions: Display RE1260_01, RE1260_02, RE1260_03, RE1260_04, RE1260_05, and RE1260_06 on the same form pane.

Display question text “Please give me…moved” in brackets and “grayed out” text.

RE1260_06 (REB1645)

BLAISE NAME: MovePhone

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

[Please give me the address and telephone number where {PERSON} has moved.]

ENTER TELEPHONE NUMBER. IF NO TELEPHONE, ENTER DK.

Responses: 1

REFUSED RF

DON'T KNOW DK

Programmer Instructions: 10 digit entry required.

Use number input mask (xxx-xxx-xxxx) in response field.

Hard check:

"PHONE ENTRY REQUIRES EXACTLY 10 NUMBERS. PROBE AND RE-ENTER OR ENTER F5 (DON'T KNOW) IF FULL PHONE NUMBER IS NOT KNOWN."

If all persons eligible to be looped on in Loop_140 are set to auxPersProcessed=YES, go to END_LP140.

Otherwise (at least one mover not processed), continue with RE1270.

Display Instructions: Display RE1260_01, RE1260_02, RE1260_03, RE1260_04, RE1260_05, and RE1260_06 on the same form pane.

Display question text “Please give me…moved” in brackets and “grayed out” text.

RE1270 (REB1646)

BLAISE NAME: AnyPersMover

Context Header: {PERSON’S FIRST MIDDLE AND LAST NAME}

Question Text:

IF KNOWN, CODE WITHOUT ASKING.

Is {PERSON} living with any of the following family members? (READ NAMES BELOW)

{1. First Name, [Middle Name], Last Name} 1

[2. First Name, [Middle Name], Last Name} 2

{3. First Name, [Middle Name], Last Name} 3

{4. First Name, [Middle Name], Last Name} 4

{5. First Name, [Middle Name], Last Name} N

Responses: YES 1 RE1280 (REB1650)

NO 2 END_LP140 (REB1655)

REFUSED RF END_LP140 (REB1655)

DON'T KNOW DK END_LP140 (REB1655)

Display Instructions: Roster 1 – Report

Roster definition:

This item displays persons for display only. Display person’s first, middle, and last names (RE_Person.FullName).

Roster filter:

Display all person who meet the following conditions:

- auxPersProcessed <> YES for person AND - Person is on RE_Person Array where MostRecentRU=RUUnit who meets any of the following conditions: :

- -MoverAtLoop10=YES

- -MoverAtLoop20=YES

- -MoverAtLoop30=YES

- -MoverAtRE940=YES

RE1280 (REB1650)

BLAISE NAME: Movers

Context Header: {PERSON'S FIRST MIDDLE AND LAST NAME}

Question Text:

Who lives with {PERSON}?

ENTER ALL THAT APPLY.

Responses: {FIRST NAME [MIDDLE NAME] LAST NAME}1 1 END_LP140 (REB1655)

{FIRST NAME [MIDDLE NAME] LAST NAME}2 2 END_LP140 (REB1655)

{FIRST NAME [MIDDLE NAME] LAST NAME}3 3 END_LP140 (REB1655)

{FIRST NAME [MIDDLE NAME] LAST NAME}4 4 END_LP140 (REB1655)

{FIRST NAME [MIDDLE NAME] LAST NAME}N 5 END_LP140 (REB1655)

Programmer Instructions: Set auxProcessedMover=YES and auxPersProcessed=YES for all persons selected at RE1280.

Roster behavior:

1. Multiple select allowed.

Display Instructions: Roster 2 – no add/edit/delete.

Roster definition:

This item displays persons for display only. Display person’s first, middle, and last names (RE_Person.FullName).

Roster filter:

Display all person who meet the following conditions:

- auxPersProcessed <> YES for person AND

- Person is on RE_Person Array where MostRecentRU=RUUnit who meets any of the following conditions: :

- -MoverAtLoop10=YES

- -MoverAtLoop20=YES

- -MoverAtLoop30=YES

- -MoverAtRE940=YES

END_LP140 (REB1655) :

BOX_470 (REB1665)

EndofRE (REB1670)

BLAISE NAME: EndofRE

Question Text:

THIS IS THE LAST SCREEN WHERE YOU CAN STILL BACK UP.

PRESS 1 AND ENTER TO CONTINUE.

Responses: CONTINUE 1

Programmer Instructions: Continue with next questionnaire section.

Display Instructions:

REWall (REB1675)

Return to Top